Prw 01 PRW Dual Gear Drives Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Prw 01 PRW Dual Gear Drives herunter. PRW 01 PRW Dual Gear Drives User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
PRW Industries, Inc.
1722 Illinois Avenue
Perris, California 92571
Tele: (951) 436-7900
Tech: (888) 377-9779
PRW Dual Gear Drives
Installation Instructions
PARTS LIST
Item
Quantity
Crank gear
1 each
Dual idler gear
1 each
Cam gear
1 each
Bronze ring
1 each
5 degree bushings (except Ford)
(varies by model)
Cam button
1 each
Cam locking plate
1 each
Cam bolts
3 each
Permanent threadlocker, Red
1 2ml bullet
Installation
Step 1
Clean all components of any preserves or deposits.
Step 2
Remove the timing cover.
Step 3
Hand turn crank to top dead center of cylinder #1. This should line up the timing marks of the cam and crank gears or
sprockets. The timing mark on the cam gear should be at 6 o’clock and the crank mark should be at 12 o’clock.
Step 4
Remove the old timing set.
Step 5
Clean from the mounting surface of the block any deposits left over from the gasket. Do the same for the timing cover.
Step 6
Using a small dab of grease, install the bronze ring onto the back of the cam gear.
Step 7
With the # 1 cylinder still at top dead center install both the cam and crank gears. The chamfered side of the crank gear
faces the crank.
Step 8
For GM and Mopar install desired off set bushing on the cam dowel pin. If the cam is not being degreed inset the 0°
bushing (bushing with hole right in the middle). Ford cam gears do not require offset bushings. Line up your desired
timing as it is marked on the cam gear. Part #’s 0130201, 0130202, 0135102 are marked with advanced (A), retarded (R),
& standard (0), part # 0146001 is marked with
+4, +8, & 0.
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - PRW Industries, Inc

PRW Industries, Inc. 1722 Illinois Avenue Perris, California 92571 Tele: (951) 436-7900 Tech: (888) 377-9779 PRW Dual Gear Drives Installation

Seite 2

Step 9 With the lock plate in place on the cam gear, torque the cam bolts with washers to factory specs. Step 10 Bend the tabs of the lock plates o

Kommentare zu diesen Handbüchern

Keine Kommentare