Prw 08 PRW Sportsman Series Steel Roller Tip Rocker Ar Bedienungsanleitung PDF herunterladen

Sportsman Series Rocker Arms

16 each

Pivot Balls & RockerLocs

16 each

Installation Guide

1 each

Installation

Step 1

After removing the rockers and other components from the package thoroughly wash each piece, and then

blow dry.

Step 2

Prior to installation, submerge the rockers in engine oil for approximately 30 minutes to insure the roller

tip and fulcrum are properly lubricated.

Step 3

Install the push rods. Make sure the pushrod is properly seated in the lifter. Fill each pushrod with engine

oil, one at a time, as you install each rocker arm. This is to assure

immediate lubrication when the engine

is started and helps prevent any galling.

Step 4

During installation, apply Extreme Pressure Lube #3 sparingly; to each push rod tip, rocker arm push rod

seat, the top of the valve stem where it comes in contact with the roller tip, and at the curved side of each

pivot ball. Install the rocker arm on the rocker studs. Check to make certain that each pushrod is seated

properly in the rocker seat and in the valve lifter. Install pivo

t ball flat side up. Thread the RockerLocs

onto the rocker arm stud but do not tighten.

Step 5

Solid Lifter Cams: Following OEM rocker arm installation guidelines and/or detailed instructions

provided by your camshaft manufacturer, adjust the valve lash with a feeler gage to the specifications

provided.

Hydraulic Lifter Cams: Following OEM rocker arm installation guidelines and/or detailed instructions

provided by your camshaft manufacturer, adjust the val

ve lash at the Top Dead Center of each cylinder or

at the “base circle” of the intake/exhaust valve cycle. Tighten each adjuster nut until all of the “slack”

between the rocker arm and pushrod is gone. Turn the pushrod with your fingers as you tighten the

adjuster nut. Do that until you feel a slight resistance when turning the pushrod; indicating that you have

reached “zero” lash. At this point turn the adjuster nut another ½ turn.

Step 6

Adjusting In

take Valves: Follow this procedure for all of the intake valves. Generally the procedure is

to hand turn crankshaft in the running rotation, checking each cylinder to identify when the exhaust

pushrod begins to move upwards. This will indicate that the intake valve lifter is at the “base circle” of

PRW Industries, Inc.

1722 Illinois Avenue

Perris, CA 92571

Tel: (951) 436-7900

Tech: (888) 377-9779

Sportsman Series Steel Rocker Arms

Installation Guide

Sportsman

Item

Quantity

1 2

Installation Guide 1

Inhaltsverzeichnis

Seite 1 - Installation Guide

Sportsman Series Rocker Arms 16 each Pivot Balls & RockerLocs 16 each Installation Guide 1 each Installation Step 1 After removing the rocke

Seite 2

the camshaft for that particular cylinder. That is the point in the firing order of each cylinder where the intake valve lash may be adjusted as deta

Kommentare zu diesen Handbüchern

Keine Kommentare

Prw 08 PRW Sportsman Series Steel Roller Tip Rocker Ar Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Prw 08 PRW Sportsman Series Steel Roller Tip Rocker Ar herunter. PRW 08 PRW Sportsman Series Steel Roller Tip Rocker Arms User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Prw 08 PRW Sportsman Series Steel Roller Tip Rocker Ar